项 目 Item |
标准规范 Specification |
机 型 代 号
Model No .Illustration |
|
|
V65D-DCD4 |
0035 |
0070 |
0110 |
0150 |
0180 |
0270 |
0380 |
0500 |
0720 |
最大适用直流马达(HP)
Max. Power of DC
Motor (HP) |
220VCD |
10 |
20 |
30 |
40 |
50 |
75 |
110 |
150 |
200 |
440VDC |
20 |
40 |
60 |
80 |
100 |
150 |
220 |
300 |
400 |
输入电源
(Vac)
Power Input |
主回路(※1)
Main Circuit |
3?200~440Vac 50 / 60 Hz ±10% |
控制回路
Control Circuit |
1?200~220Vac 50 / 60 Hz ±10%
|
额定输出
Rate Output |
电枢电流(A)
Amature Current |
35 |
70 |
110 |
150 |
180 |
270 |
380 |
500 |
720 |
磁场电流
Field Current |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
使用环境
Installation Site |
场所
Location |
屋内(避免腐蚀性气体及多尘埃之处)
Indoor (Avoid Corrosive Gases and Dust) |
周温(※2)
Ambient Temperature |
0 ~ +45 ℃ |
0 ~ +35 ℃ |
湿度RH |
相对湿度85%以下(但不结露)
Below RH85% (Non Condensate) |
标高(※3)
Altitude |
海拔500公尺以下
Under 500m Above Sea Level
|
构造
Structure |
冷却方式
Cooling Method |
自力冷却
Self-Cooling |
内附强制冷却风扇
Internal Fan Cooled |
外附风扇
Exterual Fan Cooled
|
结构
Mounting |
壁挂式、钢板制箱体,钢板制面盖,底部附接地端子(IP20)
Wall-Mounted, Steel Cabinet and Front Cover, Bottom Grounding Terminal |
涂装色
Painting |
|
特性 |
稳态精度
Stable Condition
Accuracy |
2% 电枢电压回授 (标准内附机能)
2% Amatnre Voltage Feedback (Standard Feature) |
0.1% 转速发电机回授 (标准内附机能)
0.1% Techometer Generator Feedback (Standard Feature) |
0.01% ENCODER 回授 (标准内附机能)
0.01% ENCODER Feedback (Standard Feature) |
控速范围
Speed Control Range |
100:1 (转速发电机回授)
100:1 (Techometer Generator Feedback) |
过载能力
Overload Capacity |
110% 连续; 150% 30secs; 200% 10secs
110% Continuausly; 150% 30secs; 200% 10secs |
控制特性
Control Feature |
全数位式:速度回路:可调整 PI 参数控制
电流回路:可调整PI参数控制
Full Digital Type:Speed Control Loop:Adjustable PI Parameter Control
Current Control Loop:Adjustable PI Parameter Control |
显示机能
Display |
数字式 LCD 参数显示及故障自动锁定
5 组 LED 线路状态指示(运转,停止....)
Digital LCD Parameter Display andAuto-Locked Tripping
5 LED Circuit Status Display (Running, Stop....) |
※ 1. 电枢电压:最大可达1.2 X AC 电源 (2Q、4Q)。
1. Amature Voltage :Max. 1.2 x AC Source Voltage. |
※ 2. 每超过周温1℃,需降额定 (Derating) 1%,最高不可超过+55℃。
2. Derating 1% for Every 10C of Temperature Rising Max. Temperature is +550C. |
※ 3. 标高超过500公尺,每升高200公尺,降额定1%,最高不可超过5000公尺。
3. For Altitude Higher Than 500m, Derating 1% For Every 200m Height Rieing-Max. Height is 5000m. |